The B200 Printer Error is a common problem when using a Canon printer. Several issues, such as a paper jam, a clogged printhead, or hardware malfunction, can cause this error. This guide will discuss the B200 Canon Printer Error, what causes it, and how to fix it when it occurs.
We will also provide troubleshooting tips to help prevent the error from occurring in the future. By following these steps, you can avoid the hassle and potential costs of repairing or replacing your printer.
What Does B200 Canon Printer Error Mean?
Many factors can cause your Canon printer to display the B200 error. However, some of the main issues that may cause your printer to display this error code include the following:
- Cartridge: The B200 error usually indicates a problem in the cartridge. This could be due to the cartridge being in a faulty position or due to a damaged cartridge. If so, the printer may fail to print and display the B200 printer error.
- Clogged printhead. A clogged printhead could be caused by debris or dried ink blocking the nozzle. The clogged nozzle prevents the ink from being transferred onto the paper, which may result in the printer displaying the B200 error code.
- Outdated or Corrupt Firmware: Outdated or corrupt firmware of the printer can also cause the B200 error since the printer may fail to recognize some essential hardware components.
- Paper Jam: A paper jam in the printer can also cause a B200 error.
How Do You Fix The B200 Canon Printer Error
Fortunately, resolving the B200 error code in Canon printers is quite easy. You can fix the issue by implementing a few solutions, which include:
1. Perform A Hard Restart
A hard restart can help reset and clear any error codes on your Canon printer. It can also help clear any stuck or corrupt data causing the B200 error. Resetting the printer can help it return to its normal working state.
Simply follow these steps to perform a hard reset:
- Power off your Canon printer and disconnect it from the outlet.
- Wait for about 5 minutes and reconnect the power cable and switch on the printer.
- Now check if the error message has disappeared.
- If not, power off the printer again and disconnect the power cable from the outlet.
- Hold and press the printers power button for about 30 seconds
- Reconnect the power cable to the outlet while still holding the power button.
- Wait for the Canon printer to power up and release the power button.
- Press and hold the Stop button until the printer sounds the alarm tone at least 20 times.
Now check if the B200 error message has disappeared.
2. Clean The Printhead
Clogged or dried ink can block the printhead, resulting in the B200 error message. Cleaning the printhead helps to remove any blockages and ensures that the ink flows freely again.
Method 1: Clean your printhead using the printer drivers on Windows 10.
Windows 10 and 11 OS has a feature that enables you to clean the printhead using the printer’s drivers.
Here is how to clean the printhead using Windows.
- Open the Control Panel on Windows 10/11 by typing Control Panel on the search bar and clicking the option once it appears.
- Tap on Hardware and Sound, which you will find on the Control Panel window.
- Click on Devices and Printers, which you will find after you click Hardware and Sound.
- Look for your Canon printer among the presented printers and right-click on it.
- Select Properties from the drop-down menu that will appear.
- Tap on the Maintenance and Hardware tab.
- Choose the appropriate cleaning option. In this case, choose the Clean Heads option.
- Select All Colors if available when asked which printheads to unclog.
- Select Ok to kickstart the cleaning process.
- Answer any questions and follow the prompts presented during the clean-up process.
- The printer may ask you to print a test page. End the process If you are satisfied with the result once you print the test page. If not, repeat the procedure until you are satisfied with the results.
Method 2: Clean the printhead manually
You can also clean the clogged printhead manually by following these steps:
- Turn off your printer and unplug it from the power source.
- Remove the inkjet cartridges. Be careful as you do so to prevent any damage.
- Consult the Canon Manual if you are unfamiliar with removing the cartridges.
- Remove the printhead tray gently. You will find it where the cartridges sit. Again consult the Canon Manual if you are not familiar with the procedure.
- Dip a cotton swab in warm water and squeeze off the excess. Gently wipe the printhead and its contacts with the swab. Make sure to wipe away all the ink residue.
- Dip another cotton swab in rubbing alcohol and squeeze off the excess. Again, gently wipe the printhead and its contacts with the swab. Wipe away all the ink residue.
- Let the printhead dry for about 15 minutes.
- Reinstall the printhead.
- Plug the printer back in and turn it on.
- Run a test page to see if the printhead is clean. If not, repeat the process.
Now check if the B200 error message has been resolved.
3. Remove And Reinstall Your Canon Printer Cartridges
The canon printer may display the B200 message if the cartridges are incorrectly positioned. Make sure that the cartridges are correctly installed by removing them and reseating them in the right position to resolve this issue,
Follow these steps to remove and reinstall the cartridges:
- Depending on your printer model, the cartridges may be exposed or hidden behind a cover. Open the printer cover to access the ink cartridges if they are covered.
- Lift the latch that holds the cartridges in place(if present, depending on your Canon printer), then carefully remove them from the printer.
- Check the contacts on the cartridges for any dirt or debris. If you find any, use a damp cloth to clean them gently.
- Reinstall the cartridges in the printer. Make sure that they are properly seated and that the contacts are properly aligned.
- Close the printer and run a test print to ensure everything works properly.
Now check if your Canon printer is working well again.
4. Update Your Canon Printer Drivers
Updating your Canon Printer drivers is one of the best ways to resolve the B200 error. A hardware malfunction of the printer mainly causes this error, and updating the drivers can help fix issues that may prevent the printer from recognizing crucial hardware components. Updating your printer drivers also ensures that your printer is always running the most recent version of the software, which can help prevent future errors and optimize the performance of your printer.
Follow these steps to update your Canon printer drivers:
- Go to https://www.usa.canon.com/printers and click on Support and select Software and Drivers from the options that will be presented.
- Type in your Canon’s serial number and model in the Search Box in the Drivers and Software window..
- Find the printer driver compatible with your Windows version (either 32-bit or 64-bit) and click on download.
- Double-click on the downloaded file and follow the instructions to install the drivers successfully.
Now check if the B200 error message has disappeared.
Conclusion
The B200 Canon Printer Error is a common issue. Clogged printheads, faulty cartridges, or faulty printheads usually cause the error code. Fortunately, there are a few steps that you can take to resolve the error. First, check the printer for any paper jams or blockages. If none are present, reset the printer, clean the print heads, or replace faulty cartridges. With some patience and troubleshooting, you can resolve the B200 Canon Printer Error by applying the above stipulated fixes.
FAQs
Why is my printer displaying the B200 Canon printer error message?
The B200 error message on a Canon printer usually indicates an issue with the printhead, such as a blocked or clogged nozzle or another internal component. It could also be a mechanical problem. You should clean the printhead to see if that resolves the issue.
Does a Canon printer have a reset button?
No, a Canon printer does not have a reset button. Fortunately, you can use the Stop button to perform a hard reset since it acts as the reset button on a Canon printer.
Why is my Canon printer displaying an orange light?
The orange light on a Canon printer usually indicates an issue with the printer, such as a paper jam or a low ink level. It may also indicate that the printhead has an issue preventing it from dispensing ink on the paper.
Must I replace my Canon printer when it displays the B200 error message?
You do not need to replace your printer when it displays the B200 error message. The B200 error message usually means that the printhead has become clogged or damaged and needs to be replaced or cleaned. You can clear the clog, replace the printhead yourself, or take it to a professional to have it serviced.
Can a paper jam cause my Canon to display the B200 error message?
Your Canon printer can display the B200 error message for various reasons. The device can display the message if your printhead is clogged due to debris inside the rollers or a paper jam.
